Line Scan
– Vertical Setup (Standard mode)
When setting up the unit vertical, Line Scan centers
the rotor horizontally and can be used to align the
laser reference to a desired line position. Line Scan
can be activated as a standard feature as well as
using the menu.
Pressing and releasing the buttons
simultaneously starts Line Scan while the rotor
checks the limits of the X- axis (beeps) and stops at
the center position (all laser LEDs are turned off) .
Pressing the button stops the movement and
changes the unit into manual mode.
Fine corrections left and right can be done using
buttons.
Press and release the button again to change the
unit back to full automatic mode.
