Spectra Precision Focus 6, User Manual, Page: 63 / 199

Spectra Precision Focus 6 5" Total Station User Guide
61
Getting Started
3
Entering a point from the point stack
The point stack is a list of the last 20 point names used,
in chronological order from last used to first used. To
enter a point from the point stack:
1. Select the
Stack
softkey when the cursor is in
the PT field. The stack appears.
2. Press
[^]
or
[v]
to move the cursor to the point that you want to use.
3. Press
[ENT]
.
When you return to the point input screen, the selected
point name is entered in the PT field, incremented by
one. For example, if you selected the A101 point, A102
appears in the PT field.
Entering a point from the point list
1. Select the
List
softkey when the cursor is in the
PT field. A list of existing points appears.
2. Press
[^]
or
[v]
to move the cursor to the point that
you want to use.
3. Press
[ENT]
.
When you return to the point input screen, the selected
point name is entered in the PT field. Add numeric or
alphabetic characters if required.
Entering a code
The CD (Code) field defaults to the last code used. You can select a different code in the
input point screen or press
[COD]
in the BMS screen. For more information, see [COD]
button, page 50
Codenames can be numeric or alphanumeric, and up to 16 characters long.
There are several ways to enter a code:
•
Enter a code directly, see page 62
•
Enter a code from the code stack, see page 62
•
Enter a code from the code list, see page 62