Spectra Precision Focus 6, User Manual

Page: 64 / 199

3
Getting Started
62
Spectra Precision Focus 6 5" Total Station User Guide
Entering a code directly
1. To change the input mode to alphanumeric or
numeric, press
[MODE]
.
2. Use the keypad to enter the code.
Entering a code from the code stack
The code stack is a list of up to 20 recently used codes.
When you reboot the Focus 6 5" total station, the code
stack is cleared.
To enter a code from the code stack:
1. Select the
Stack
softkey when the cursor is in the
CD field. The stack appears.
2. To move the cursor to the code that you want to
use, press
[^]
or
[v]
.
3. Press
[ENT]
.
The selected code is copied to the CD field.
Entering a code from the code list
1. Select the
List
softkey when the cursor is in the
CD field. A list of existing codes appear.
2. Press
[^]
or
[v]
to highlight the feature code that you
want to use.
3. Press
[ENT]
.
A layer has an arrow at the end of the code label. If you
highlight a layer in the list and then press
[ENT]
, the
codes and layers in that layer are displayed.
When you return to the input screen, the selected code
is entered in the CD field.
Advanced feature: Searching for a code using the first character
Items are shown in alphabetic order. To find a code quickly when the code list appears,
use the first-character search. For example, to see feature codes that begin with T, use
the keypad to enter the letter T (press
[1]
twice).