Chapter 6. Using the Serial Port Interface
57
Enabling Options
The Option Enablement Menu (Figure 6-11) allows you to enable and disable options
on the library. Looking at the options available on the menu, you will see that the
options exist in the following states:
Not Licensed
This option is not available until purchased and activated with a key code.
Licensed/Disabled
The option has been purchased but is currently inactive.
Note:
Ethernet libraries may have only one protocol active at any given
time. Enabling one Ethernet protocol will automatically disable all
other Ethernet protocols that are currently licensed.
Licensed/Enabled
The option is currently licensed and active.
1.
To launch the Options Enablement Menu, select
8
from the main menu.
2.
Contact Spectra Logic with the identifier of the device, as shown in Figure 6-11,
to obtain an activation code that will enable options for this device.
The Option Enablement Menu gives you the following options:
[1] Change options key string:
Enter the activation key code from Spectra Logic to enable
options for this library.
Figure 6-11
The Options Enablement Menu.
