Chapter 4. Using the Serial Port Interface
39
Enabling Options
The Option Enablement Menu (Figure 4-8) allows you to enable and disable options on
the NAStape. Looking at the options available on the menu, you will see that the
options exist in the following states:
Not Licensed
This option is not available until purchased and activated with a key code.
Licensed/Disabled
The option has been purchased but is currently inactive.
Note:
Ethernet storage devices may have only one protocol active at any
given time. Enabling one Ethernet protocol will automatically
disable all other Ethernet protocols that are currently licensed.
Licensed/Enabled
The option is currently licensed and active.
1.
To launch the Options Enablement Menu, select
8
from the TAOS Configuration
Menu.
2.
Contact Spectra Logic with the identifier of the device, as shown in Figure 4-8,
to obtain an activation code that will enable options for this device.
[
Figure 4-8
The Options Enablement Menu.
