Chapter 4. Using the Serial Port Interface
38
Configuring NDMP
1.
Select
5
from the TAOS Configuration Menu to access the TAOS NDMP
Configuration Menu (Figure 4-7).
The TAOS NDMP Configuration Menu gives you the following options:
[1] Cleartext passwords
Select
1
to either enable or disable cleartext passwords.
[2] NDMP Port
Select
2
to set the NDMP port.
2.
Press
Esc
to return to the TAOS Configuration Menu.
There will be an asterisk (
*
) next to the menu option, indicating that an unsaved
change has been made.
3.
Select
9
to save the changes.
4.
Select
y
when prompted to reboot.
Note:
You must reboot the NAStape in order for the new NDMP
parameters to take effect.
Figure 4-7
The TAOS NDMP Configuration Menu.