Chapter 4 - Configuring Advanced Bucket Management
Create a Replication Target
9.
Using the drop-down menu, select a value for
Access Control Replication
.
Name
Description
None
No access control information is replicated to the BlackPearl
target.
Note:
The Administrator secret key on both the source and
target BlackPearl systems must be identical when setting
Access Control Replication to
None
.
Users
User creation, modification, and deletion is replicated
to the BlackPearl target.
10.
If you selected Users in
, you can optionally enter the name of a data policy
previously configured on the target system to use as the
Replicated User Default Data
Policy
. If configured, the system uses this target data policy as the default data policy for
any users replicated to the target.
11.
Optionally, enter the IP address of the
Data Path Proxy Server
. If configured, the source
system uses the specified proxy to connect to the target system.
12.
Click
Create
. The new BlackPearl target appears on the Advanced Bucket Management
screen.
Create an Amazon S3 Target
Configuring an Amazon S3 target allows a data policy on the BlackPearl system to replicate
data to the Amazon S3 cloud. With replication enabled, as soon as data is PUT to the cache
of the source system it begins replication to the Amazon S3 cloud.
Note:
Only Amazon Web Services (AWS) S3 is qualified as an Amazon S3 target. Other
S3 services have not been tested.
Restrictions
The following restrictions apply to creating an Amazon S3 target:
• You cannot create two Amazon S3 targets using the same Data Path End Point and
Access Key.
• You cannot create two Amazon S3 targets using the same Region and Access Key
when the Data Path End Point has no value.
• You cannot link multiple Amazon S3 targets to the same Data Policy when both
targets have no value for the Data Path End Point, and the prefix and suffix are the
same for both targets.
November 2020
User Guide-BlackPearl Converged Storage System
- 112 -
