Spectra 20K/64K Library AIT-4 Drive Upgrade
5
Removing Original Drives
1.
Use the library door key to open the library door.
2.
Pull the old drive out of the drive slot (Figure 3).
3.
Slide the new drive firmly into the same slot while pressing it to the right against
the library wall. A red LED on the drive lights up.
4.
Close the library door.
5.
Secure the lock with the key.
6.
Return to the Library Controller, then select
OK
. The library processes this
change, and may require a few minutes to complete. When the drive has been
configured,
another statement displays: The library geometry has changed-
Reloading geometry, your drive information may be invalid.
Tap
OK
.
7.
Select OK.
8.
Review the Drive Configuration screen. If the drive displays as offline, select
Config
, then select
OK
. The drive now displays as online.
The library automatically configures the new drive with the old drive’s
configuration settings.
9.
Repeat this procedure for every drive to be upgraded.
Figure 3
Pull the old drive out of the drive slot.
