4 Setup
WARNING –
Do not use the Laser Pointer as an aid when searching for prisms, see Laser Safety,
To avoid faulty measurements using the Laser Pointer, use the supplied adjustment target to check the
laser alignment regularly and before you attempt precise distance measurements:
Setup the adjustment target 10-15 meters (30-50 ft) away, facing the instrument.
Aim the instrument to the center of the target plate and then inspect the position of the red laser spot in
relation to the telescope cross-hairs.
If the red laser spot lies outside the cross-hairs, adjust the direction of the beam until it matches the
cross-hairs, see the Laser adjustment plate, below:
Adjusting the Laser Beam
Pull out the two plugs from the adjustment ports of the telescope housing:
The image shows the Laser beam adjustment ports.
FOCUS 35 Total Station User Guide |
73
Summary of Contents for Focus 35
Page 1: ...FOCUS 35 Total Station User Guide...
Page 109: ......
