NOTE: To verify remaining battery power, press power button:
4 blue LED indicates 100 – 75% battery power remaining
3 blue LED indicates 75 – 50% battery power remaining
2 blue LED indicates 50 – 25% battery power remaining
1 blue LED indicates 25 – 0% battery power remaining
To charge electronic devices using the T1042
a) Via T1042 wireless charging area:
** Make sure your device has integrated wireless charging capability or is equipped with wireless charging
adapter (NOTE: some electronic devices with integrated wireless capability may require users to
manually enable wireless charging in the settings of their electronic devices)
1.
Center your electronic device over the wireless charging area located at the back of the T1042 (see # 9
of Product Map above) & power ON the T1042. Solid blue LED indicates the T1042 is wirelessly
charging your electronic device (NOTE: the solid blue LED will be lit while wirelessly charging your
device & will remain lit once your device is 100% fully charged)
2.
To stop charging and/or power off light up feature, remove your electronic device from charging dock
(the T1042 will automatically power OFF when inactive for approx. 30 seconds)
b) Via USB/micro-USB charging cable:
1. Insert the following cable into the T1042 USB output:
i.
To charge devices with micro-USB input port: use the micro-USB/USB cable included with the
T1042.
ii.
To charge iOS devices: use the certified charging cable accessory that came with your smart
phone/electronic device.
2.
Solid blue LED will remain lit while your device is being charged
(NOTE: once your device is 100% fully charged, charging will stop & the T1042 will automatically
power OFF)
CAUTION:
Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or
touched for short periods onl
y. Don’t heat above 50 °C or Incinerate. Follow Manufacturer’s Instructions
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired
operation.
Warning
:
Changes or modifications not expressly approved by the party responsible for complia
nce could void the user’s
authority to operate the equipment.
