T244 Product Map
T244 Operation
Wireless Mode
1. Wireless Mode: Push ON/OFF switch once to the right (aligned with the
icon, see Product
Map)
2. AUX Mode: Push ON/OFF switch to the far right (under the ON icon)
3. OFF: Push switch to the far left (under the OFF icon)
Wireless Pairing
1. Once power switch is pushed to the
icon, T244 is entered in WIRELESS pairing mode
(multicolored LED lights will appear to indicate that the T244 is ready for Wireless pairing)
2. Enable Bluetooth function on your electronic device.
3. Search Bluetooth signal Spector T244
& pair
your device (a short audio prompt will indicate
the devices are paired)
NOTE: previously paired devices will automatically connect to the T244 speaker
Wireless Mode
1. Turn the T244 speaker on by setting button to the
Icon
2. Play/Pause/Volume control/Skip songs must be controlled directly on your audio device (no
built-in microphone for answering incoming calls)
AUX Mode
1. To activate AUX mode turn the T244 ON & plug the 3.5mm audio jack into your audio device
2. Play/pause/volume control/skip songs can controlled directly on your audio device only
To Charge the T244
1. Insert the 3.5mm audio output (attached to the T244) into the audio input/USB cable
accessory provided
2. Insert USB output & cable accessory to a wall adapter (not included)
3. A red LED light indicates the device is charging (red LED will turn OFF once fully charged)
Power ON/OFF button
Wireless icon
