T243 Product Map
T243 Operation
NOTE:
T243
supports wireless connections only (no integrated AUX input)
a.
Remove dust cover & turn speaker switch ON (Blue LED light will flash quickly to indicate
speaker is ready for pairing).
b.
Activate Bluetooth on your audio device and select Bluetooth signal
Spector
T243
(blue LED light
will remain lit when devices are successfully paired)
c.
To DISCONNECT from wireless mode, press & hold the button for 3 seconds
d.
To power off, remove dust cover and switch OFF
NOTE: previously paired devices will automatically re-connect to the
T243
speaker when both devices
are turned on & within range.
2. Operation in Wireless Mode
1)
Press to play/pause in music mode (Blue LED will flash slowly when music is paused)
2)
Press quickly to skip to next song/Press & hold to increase the volume
3)
Press quickly to skip to previous songs/ Press & hold to decrease the volume
4)
Press to answer/end incoming call
To Charge T243
a.
Insert the Micro-USB charging cable into the speaker & connect USB output to a wall adapter (not
included).
b.
Red LED light indicates the speaker is in charging mode (LED light will turn off when speaker is
fully charged)
LED Indicator
Microphone
Volume Up
Volume Down
Play/Pause/Answer/End call Button
Charging input
ON/OFF Switch
Dust Cover
