3
1-3 LED Function
GPS Status LED(Blue)
․
Blink --- GPS position is not fixed
․
Solid --- GPS position is fixed
2 Install Driver
You have to install the driver before you can use the SDG-810 GPS receiver
with your Pocket PC.
2-1 install driver from desktop or laptop PC
1
st
step: The driver will be installed into the Pocket PC via the Active
Sync program. So before you start, please make sure the ActiveSync
has been installed and the Pocket PC is connected to your desktop PC.
2
nd
step: Put the CD into CD-ROM drive. The AutoRun will start the
installation program automatically. Click on the SDG-810 button to
install the driver. (or you can manually install it by double click the
“Spectec-GPS.exe” from the root directory of the CD.)
Summary of Contents for SDG-810
