ONSIP OS101 User’s Guide
Rev.1.0 (Nov., 2011)
13
DC12V Power Output
:
Power output for analog camera
This output is intended to supply power to analog camera being installed with ONSIP OS1
01. Refer to the following table for available power to the analog camera of power in
put.
Type of power input spec
video server
consumption
Power Output
PoE(10W)
5W
5W
DC12V, 1.0A (12W)
7W
DC12V, 1.5A (18W)
13W
DC12V, 2.0A (24W)
19W
DC12V, 2.5A (30W)
25W
DC12V, 3A (36W)
Max 25W
There is a power cable for feeding power to the analog camera. Plug one end of the cabl
e into the DC power output of the video server and the other end into the DC power Inp
ut of the analog camera. Two sizes of the plug (2.0
Φ and
2.5
Φ
) are available on camera
side.
Caution:
If ONSIP OS101 is powered by PoE, do not plug in DC Jack with active DC
power into DC power input connector.
CVBS, Y/C Video In
: Connect conventional analog video signal.
Simultaneous connection is not allowed.
Connection to D
C power i
nput of
analog ca
mera
Connection to D
C power o
utput of vi
deo serve
r.
Figure 2-4. Power cable for analog came
ra
