1.2 Dimensions
Note:
Please refer to the following figure fo
or dimension information. The unit is mm. See Figure 1
1- 2.
Figure 1-2
1.3 Alarm Setup
Figure1-3
Alarm input, output description:
Step 1
Connect alarm input device to the alarm input of the I/O cable.
Step 2
Connect alarm output devic
ce to the alarm output of the I/O cable. Alarm output is
s an open
collector circuit which conn
nects 10K resistor to 3.3V externally.
Step 3
Open the web viewer and sset the alarm input and output correspondingly. When
n there is an
alarm signal, the alarm inpu
ut device will generate high and low level signals. Set tthe
corresponding type to NO o
or NC .
Step 4 Set the alarm output. The ala
arm output is for the alarm output port of the device.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
