Step 1
Put installation template on the designated
surface where you will install the device (wall
or ceiling).
Step 2
Drill holes according to position of the holes
on the installation template.
Step 3
Open accessories bag, take out the
expansion bolts and insert them into the
drilled holes.
Step 4
Take out the screws. Tighten the 4 screws to
fix the device on the installation surface (wall
or ceiling). The sun shield can be adjusted.
Tighten the screws on the sun shield.
Step 5
Connect all applicable wiring properly.
Figure 2-2 Installation
Step 6
Use Philip’s head screw to loosen the
adjusting screw.
Step 7
Adjust the device to the desired angle.
Step 8
Use Philip’s head screw to tighten the screws.
3
Network Configuration
The camera is set to DHCP mode out of the
box.
3.1 IP Scanner Operation
IP Scanner can search for the device on the
local network. Please note that only devices
that are on the same subnet can be
discovered.
Open up IP Scanner.
In the device list, you can view the IP address,
model number, and Mac address of each
device. Select the applicable device and
double click to open
Figure 3
3.2 Web Operation
This device supports viewing and
management via a web browser on a PC.
Open the browser and input the IP address
of the camera in the address bar or double
click the device in IP Scanner.
Network Configuration
The camera is set to DHCP mode out of the
3.1 IP Scanner Operation
IP Scanner can search for the device on the
network. Please note that only devices
that are on the same subnet can be
Open up IP Scanner.
In the device list, you can view the IP address,
model number, and Mac address of each
device. Select the applicable device and
double click to open up the web viewer.
Figure 3-1 IP Scanner
3.2 Web Operation
This device supports viewing and
management via a web browser on a PC.
Open the browser and input the IP address
of the camera in the address bar or double
click the device in IP Scanner.
The login interface is shown below. See
Figure 3-2.
Please input your user name and password.
Default user name is
admin
and password is
1234
.
Note: For security purposes, please change
the password after initial login and keep it
in a safe place.
After logging in, follow directions to install
applicable plugins.
Figure 3-2 Web login
Note
•
This guide is for reference only.
Slight differences may be found
in the user interface.
•
All the designs and software here
are subject to change without
prior written notice.
•
All trademarks and registered
trademarks mentioned are the
properties of their respective
owners.
•
Please visit our website at
specotech.com or contact
customer service for more
information.
