4
2.2
Installation Steps
2.2.1
Installation Environment
The ceiling mount speed dome can be installed on a hard surface ceiling in an indoor
environment. Before the installation, please make sure:
The ceiling is thick enough to install the expansion bolt.
The ceiling can sustain at least 8x the weight of the speed dome.
2.2.2
Installation Steps
Step 1
Install the default pedestal seal ring as shown in Figure 2-1.
Step 2
Confirm the installation position, drill holes on the ceiling according to the installation
template, and then put the three plastic expansion bolts into the holes.
Step 3
Unscrew three locking screws on the enclosure by using the hex wrench, and remove the
enclosure.
Step 4
Use the three self-tapping screws to fix the pedestal on the surface, and insert the screws
into the expansion bolts.
Step 5
Use the three locking screws to fix the dome enclosure on the pedestal.
