O
O
2
2
F
F
D
D
4
4
M
M
U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
4.2. Quick Installation Guide
4.2.1. Connect PC and O2FD4M to network.
1. Prepare a PC to run programs for the installation and video connection
(PC is needed to assign IP address to
2. In the case of using PoE, connect the PC and
If your LAN Switch does not support standard PoE, connect
The DC power is applied through DC adapter.
Figure 4
4.2.2. Set IP parameters on O2FD4M
Follow the sequence below for setting the IP parameter
i)
Run ONSIP installer
ii)
Click (1) in ONSIP installer window.> Double click on (2) > Fill in (4) > make a
the parameters in (6)
iii)
Click on (9) to apply the settings.
iv)
You can connect to admin page by clicking on (10).
to network.
Prepare a PC to run programs for the installation and video connection
(PC is needed to assign IP address to O2FD4M)
In the case of using PoE, connect the PC and O2FD4M to the network using one of the following ways.
If your LAN Switch does not support standard PoE, connect O2FD4M as shown in dotted line in Figure
The DC power is applied through DC adapter.
Figure 4-1. Power and network connection
Follow the sequence below for setting the IP parameter
(1) in ONSIP installer window.> Double click on (2) > Fill in (4) > make a selection in (5) > Fill
(9) to apply the settings.
You can connect to admin page by clicking on (10).
LAN switch with
standard POE
(802.3af)
LAN switch
DC adaptor
to the network using one of the following ways.
own in dotted line in Figure.
selection in (5) > Fill