Speco N64NR, User Manual, Page: 30 / 114

Live View
Introduction
NVR User Manual
5 Live View Introduction
5.1 Live View Interface Introduction
You should add a camera first after logging on to the system (see 4.1.1 Add Camera for details). Refer to the interface
as shown below, drag one camera in the preview window to another window for camera window exchanging.
The record symbols with different colors in the live view window refer to different record types when recording: green
stands for manual record, red stands for sensor based record, yellow stands for motion based record, blue stands for
schedule record and cyan stands for intelligence record.
Click the preview window to show the tool bar as shown in area ①; right click the preview window to show the menu
list. The tool bar and menu list are introduced in the table below.
Button Menu List Meaning
-- Move tool. Click it to move the toolbar anywhere.
Manually
Record On
Click it to start recording.
Instant
Playback
Click to playback the record; click “Instant Playback” to
select or self-define the instant playback time. See 8.1 Instant
Playback for details.
Enable Audio
Click it to enable audio. You can listen to the camera audio by
enabling audio.
Snap
Click it to pop up the snap window. Click “Save” in the window
to save the image. Click “Export” to export the image.
PTZ Control
Click it to go to PTZ control interface. See Chapter 6 PTZ for
details.
Zoom In Click it to go to single channel amplification interface.
--
Click it to go to image adjustment interface. Refer to 5. 4.5
Image Adjustment for details.
-- Camera Info Click it to view the camera information.
23