8
Figure 4-2
Click
to edit an IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username
and the password of the camera. You can check “Sync to IPC” to modify the IP address of the IP camera via different
network segments for being in the same network segment with the DVR. Click “OK” to save the settings.
Click
to edit the added camera as shown on the above right. Input the new camera name, IP address, port, username
and the password of the camera. You can click “Test” to test the effectiveness of the input information. Click “OK” to
save the settings. You can change the IP camera name only when the added camera is online. Click “Next” to continue.
4.6
Disk Settings
Disk Settings.
You can view the disk number, disk capacity of the DVR and serial number, Read/Write status of the disk.
Click “Formatting” to format the disk. Click “Next” to continue.
