Speco DVR-X1 Operating Instructions Manual Download Page 8

                                             

       

DVR-X1 User Manual 

5. Playback Mode 

5.1 Play Mode 

In normal or sequence mode, press 

<PLAY> 

key to enter the playback 

mode, or press

 <SEARCH> 

key to enter the log files list

 

(including: 

date, time), then press 

<PLAY> 

key or

 <ENTER>

 key to display 

image.

 

 

 Quick Image Search

 

Press

 <F.F.>

 key, for quick fast forward search image (x2, x4). 

Press 

<REW>

 key, for quick fast reverse image (x1, x2, x4). 

Press 

<PLAY>

 key once again to return to normal speed. 

 

 Skip Search

 

Press

 <STEP>

 key, to skip and pause images. 

 

 Zoom

 

When the resolution is 720x240, press 

<ENTER>

 key to enlarge, 

press 

<II

`

>

 key and than press 

<

>

<

>

<

>

<

key to 

allow the zoom in window to be moved to all directions, press 

<ENTER>

 key again to return to its original size. 

When the resolution is 360x240, press 

<ENTER> 

key to enlarge, 

press 

<ENTER>

 again to return to normal image size (360x240).

 

 

 Stop mode

 

Press 

<STOP>

 key to stop play mode and return to normal mode. 

 

7

Summary of Contents for DVR-X1



























Reviews: