27
4-4. Setup – Device Mode
In the Setup menu, select the Device tab. Then, the device menu is displayed as pictured below. Navigate
through the menu items or change the settings using the mouse or the remote control.
Figure 4.4.1. Device Setup Screen
Table 4.4.1. Menu Items in Device Setup Screen
Item
Description
Alarm Out/
Alarm Duration
Set the sensor, motion, and video loss for triggering alarm relay
HDD Error and Video Loss can trigger beeping
.
Digital Deterrent
Set schedule and audio recordings for Digital Deterrent. (Refer to
Page 29)
Controller & PTZ
Set the PTZ baud rate, protocol, and ID. (Refer to Page 30~31)
Spot-Out
CVBS Out is can be used as Composite Video Output or Spot-Out
depending on the Sub Monitor Out of Display setup menu. *D16VN
does not have CVBS/Spot-out port due to the limited space on a
rear panel.
(Spot-On Event on/off, Spot Event Dwell Time, Sequence On/off,
Sequence Dwell Time, Spot Channel) *The last image will keep on
the screen until the next event occurred.
