65
English
Appendices
Image does not display in 3D
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
Select
`
“3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 33.
On Screen Messages
Power off confirm
y
Power Off?
Press power key again.
Fan lock error
y
The proejctor will switch off automatically.
Warning! FAN LOCKED
No source found
y
VGA 1
No Source Found
Out of display range
y
VGA
Out of display range
Over temperature
y
Warning! TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
