Speck XTRAMIXcxi, Reference Manual

Page: 11 / 56

Frequency Response
(Any primary line In to Program Out)
Subgroup Feed Output Level
Subgroup Insert Send Output Level
Program Feed Output Level
Monitor Feed Output Level
Effects Send Output Level
Tuner Feed Output Level
Headphone Output Level
Normal
+4 dBu=0VU
+4 dBu
+4 dBu=0VU
+4dBu
+4dBu
+4dBu
Maximum
+28dbu
+20dBu
+28dBu
+21.5dBu
+21.5dBu
+20dBu
4 Watts
Output Distortion(THD+n)
22Hz to 22KHz
Unweighted
.0067%
A-weighted
.0037%
Specifications (Cont.)
6
6Hz(-3dB) to 154kHz(-3dB)
Test Conditions:
0dBu signal at left input.
Input level control set to 3 o'clock position.
Input channel assigned to subgroup #1.
Subgroup master #1adjusted to indicate 0 VU.
Monitor channel #1 level set to 3 o'clock position.
Monitor pan pot centered.
Program master adjusted to indicate 0 VU.
Frequency response measured at program feed-left.
Residual Noise Measurement
(Any primary line In to Program Out)
-89 dBu (unweighted)
-95 dBu (A-weighted)
Test Conditions:
0dBu signal at left input.
Input level control set to 3 o'clock position.
Input channel assigned to subgroup #1.
Subgroup master #1adjusted to indicate 0 VU.
Monitor channel #1 level set to 3 o'clock position.
Monitor pan pot centered.
Program master adjusted to indicate 0 VU.
Input signal removed and terminated with 100
Ohms.
Noise measured at program feed-left.
Power requirements (Mixer)
Power requirements (Power Supply)
Bi-polar 16.25 volts DC, 1.3 Amp
120/240 VAC, 1/.5 Amp
Dimensions (Xtramix)
Dimensions (Power Supply)
HxWxD = 7" x 19" x 7"
(178mm x 483mm x 178mm)
HxWxD = 3.75 x 11.25 x 5.25
(95mm x 286mm x 133mm)
Shipping weight Approximately 33 lbs (14.9Kg)
ALL MEASUREMENTS WERE PERFORMED WITH AN AUDIO PRECISION SYSTEM ONE TEST SET.
Chapter 1 Introduction Section