With only a simple connection, the mix sections of two MP 5.0's can be
summed together and operate like a multichannel mixer.
To link two MP 5.0's, an optional MP50-LINK2 mix link cable is
required. This link cable has RJ-45 modular plugs on both ends. One end
has a "clear" colored plug and the other end has a "red" plug. The MP 5.0
that receives the "red" plug is the unit that will become the master.
The illustration below shows how to link two MP 5.0's.
Linking two MP 5.0's
DIRECT
OUTPUT
INPUT
MIX LINK
speck
electronics
S/N
230V (.1A)
MIX LEFT
INSERT RTN
PRE OUT-
B
INSERT SEND
LINE IN
AUX DC OUT
CAUTION
MicPre 5.0
115V (.2A)
MIX RIGHT
O.S.P.
OR
RISK OF ELECTRICAL SHOCK - DO NOT
OPEN OR EXPOSE TO RAIN OR MOISTURE.
NORMAL
DIRECT
OUTPUT
INPUT
MIX LINK
speck
electronics
S/N
230V (.1A)
MIX LEFT
INSERT RTN
PRE OUT-
B
INSERT SEND
LINE IN
AUX DC OUT
CAUTION
MicPre 5.0
115V (.2A)
MIX RIGHT
O.S.P.
OR
RISK OF ELECTRICAL SHOCK - DO NOT
OPEN OR EXPOSE TO RAIN OR MOISTURE.
NORMAL
Chapter 2
Installation Section
11
Clear
Red
MP50-LINK2 cable
To line inputs on a mixer,
DAT, or A/D converters
