Routine Maintenance
To maintain the performance of your BADU
®
Clean Supreme:
•
When removed from the pool, make sure the hose is stowed straight. Never coil the hose as this
may cause distortion which may adversely affect the pool cleaner.
•
Remove the pool cleaner (including hose) before chemical treatment. Wait a minimum of 4 hours
after super chlorination (shock treatment) of your pool before re-installing the pool cleaner.
•
Clean the filter, skimmer basket and pump basket regularly.
•
When not in use, keep the cleaner Skirt flat, to avoid risk of warping.
•
Periodically inspect your pool cleaner for signs of wear. If necessary, replace any worn parts.
•
NOTE:
Due to the harsh conditions in which your cleaner operates, its colour may fade and
discolour over time.
Replacing the Diaphragm
The diaphragm of your pool cleaner operates at the rate of approximately 360 beats per minute.
If your pool cleaner operates daily for 8 hours, the diaphragm will open and close over
60 000 0000 times in a year! The design has been perfected over many years and, properly cared
for, the diaphragm will lasts for several seasons. In the event that it does become worn or damaged
and needs to be replaced, simply follow these easy steps:
7
1.
Unscrew the Lock Nut and remove it, together with the Outer Extension Pipe and the Thrust Washer.
Place these items to one side.
2.
Hold the Inner Extension Pipe (IEP) and gently pull it towards you. This pulls the tabs out of their recess.
