9
Maintenance
/Service
05/2013 VG
766.2330.061
EN
57
9 Maintenance/Service
Always disconnect from the power supply before commencing any
maintenance work. Secure this disconnection.
When?
What?
Regularly
Check the pump is not leaking.
Check the stability of the unit All impurities
should be removed.
Check the electrical contacts in general.
Separate potential connector.
If there is a risk of
frost.
During winter, remove the unit out of the
pool. Empty and store it in a dry location.
Only have the pump repaired by the manufacturer or an authorized
dealer.
If the case pf pump leakage, the unit may not be operated and must
be disconnected from the power supply.
After finishing maintenance work, take all required steps for start up.
See chapter 6, page 51.
9.1 Care
Instructions
If needed, wash the unit with water and wipe with a moist cloth.
Do not
use abrasive cleaning agents!
A few sprays of a cleaning agent especially for the use on acrylic sur-
faces can be occasionally used. Wipe with a clean dry cloth. Heavily
soiled surfaces can be cleaned with warm soapy water or a mild
cleanser.
Lime-scale deposits/water spots can be removed with a mixture of
white vinegar and water. Removal of light scratches or rough spots on
shiny surfaces can be done with the help of a buffing kit found in sani-
tary supply stores.
