background image

11

8. BATTERY / CHARGER

Your bicycle is powered by a Lithium-Ion (Li-Ion) battery. Always adhere to the following instructions when handling 

or charging the battery or when using the LEVO/KENEVO bicycle:

 

„

Only operate the battery between the temperature range of -20° C (-4° F) and +70° C (+158° F).

 

„

Only use the LEVO/KENEVO battery with the LEVO/KENEVO bicycle. Do not use the LEVO/KENEVO battery 

with any other bicycle or any other battery with the LEVO/KENEVO bicycle, even if it fits.

 

„

Always turn the battery off before connecting or disconnecting the wiring harness or charger to or from the battery.

 

„

Turn off the battery, unplug the charger from the battery and remove the battery from the bicycle before 

performing work of any kind, such as installation, maintenance, cleaning and/or repair. When transporting or 
handling the battery separately from the bicycle, ensure the battery is OFF. Touching the contacts when the 

battery is ON can result in electric shock and/or injury.

 

„

Before riding the bicycle, make sure the battery is properly secured in the frame.

8.1. OBSERVE AND OBEY

 

„

Do not modify, open or disassemble the battery or charger. Modification or disassembly may result in a short 
circuit, fire or malfunction.

 

„

The battery is very heavy. Be careful when handling it and do not drop it.

 

„

Do not allow any nails, screws or other small, sharp and/or metallic objects to come in contact with the battery or 

the battery’s charging socket.

 

„

Do not allow the battery to overheat. Protect the battery from excessive sun exposure.

 

„

Do not expose the battery to an open fire or radiator heat.

 

„

Do not submerge the battery in water.

 

„

Keep the battery away from metal objects as that can cause a short-circuit.

 

„

Do not use a battery that shows any signs of damage to the casing or charging port, or is leaking any fluids. 

Battery liquid can cause skin irritation and burns. In the event of damage that results in skin or eye contact with 
any liquid from the battery, immediately flush with water and seek medical assistance.

WARNING! Failure to follow the instructions in this section may result in damage to electrical 

components on your bicycle and will void your warranty, but, most importantly, may result in 

serious personal injury or death. If your battery or charger exhibits any signs of damage, do not 

use it and immediately bring it to your Authorized Specialized Retailer for inspection. 

8.2. CHARGING AND USING THE BATTERY

 

„

Regularly inspect the battery and charger for damage. Never charge a battery which you suspect is damaged or 
know is broken, and do not use it.

 

„

Make sure the charging socket and plug are dry before connecting and charging the battery.

 

„

Only use the Specialized charger supplied with the bicycle or other chargers approved by Specialized. Inspect 
the charger before every use for possible damage to the charger itself, the cable or the charging plug. Never use 

a charger which you suspect is damaged or know is broken.

 

„

Place the charger on a stable, level surface unaffected by heat. If the battery is charged outside of the frame, 
place the battery on the same surface as the charger.

 

„

You should charge the battery in a dry, well ventilated area and make sure the battery and charger are uncovered 

during the charging process. Ensure that the battery and charger are not exposed to any flammable or 
dangerous substances.

Summary of Contents for Turbo Levo FSR 6FATTIE



























Reviews: