Add a washer to each bolt, then starting with
the upper bolts, thread the bolts through the
stem faceplate into the stem body making
sure they are equally finger-tightened.
Adjust the handlebar to the desired
position making sure it is centered.
1
2
2
1
Using a torque wrench and the
corresponding hex bit, gradually torque
the upper bolts alternating from the
left to the right to evenly increase the
torque until the specification is reached.
Using a torque wrench and the
corresponding hex bit, gradually torque
the lower bolts alternating from the
left to the right to evenly increase the
torque until the specification is reached.
STEP 18
STEP 17
STEP 19
STEP 20
