Specialized Enduro Comp, User Manual, Page: 17 / 28

14
DD : MID LINK AXLE
12 OD x 61 L
FF : MID LINK SPACER
8.5 ID x 23.5 OD x 6 W
EE : MID LINK BOLT
M8 x 16 L
„
Grease, then insert the mid link axle DD into the non-drive side mid link, place the drive
side bolt EE through the drive side spacer FF , then thread it into the mid link axle.
4. MID LINK @ UPPER LINK
U : MID LINK UPPER SPACER
12.1 ID x 20 OD x 3 W
GG : UPPER LINK FEMALE AXLE
12 OD x 17.5 L
HH : UPPER LINK MALE BOLT
M9 x 14 L
„
Grease, then place the upper spacers (x4) U against the mid link upper bearings, then
rotate the mid link into position to align with the middle bore of the upper link.
„
Grease, then slide the upper link axles (x2) GG into the upper link middle bore from the
inside, then thread the upper link bolts (x2) HH into the axles.