3
S184700001
STC MY18 DIVERGE SEAT CLAMP WITH RACK MOUNT 30.6
9892-5025
SPECIALIZED ELITE REAR RACK
INSTALLING FENDERS
The Diverge frame is designed for maximum tire clearance. As a result, the frames do not have a chainstay or seatstay bridge, which are generally used to attach fenders. In order to mount
fenders on a Diverge frame, the use of a custom seat tube mounted bracket to mimick the seatstay bridge and an extra long spacer to mount the fender at the bottom bracket area are required.
7
Apply a strip of Mylar
tape between the frame
and the bracket.
ALLOY FRAME
8
Install the bracket on the seat tube. The vertical position on the seat tube will vary depending on the size of the frame. For smaller sizes, the bracket may have to be positioned above the
seatstays. The fender can connect against the upper or lower surface of the bracket. To install on alloy frames, use the supplied shim.
At the chainstay, place a spacer between the bottom bracket and the fender. For alloy frames, use the 5mm long spacer. For carbon frames, use the 10mm spacer. When mounting the
fenders, the intended result is to have equal spacing (more than 6mm) between the tire and fender along the entire circumference of the fender.
For additional information about installing Plug N Play fenders, please refer to the Plug N Play user manual.
To protect the seat tube paint finish, we recommend applying a layer of mylar adhesive between the fender bracket and the seat tube.
The maximum tire size when using fenders is 700x32c.
INTERNAL CABLE ROUTING
The Diverge frames are equipped with internal routing entry ports. A selection of “Hood Scoops” are provided to accommodate the desired shifter/disc brake/dropper post setup. S186500002
is not provided with the frames, it is only available separately.
ITEM #
PART #
DESCRIPTION
1
DRIVE SIDE
No housing ports
No dropper post, no mechanical front shifter
S186500002
CBG MY18 ALLOY CABLE ENTRY WITH NO-HOLE. CLOSED
VERSION FOR NON-DROPPER BIKES & NO REMOTE & 1x
2
DRIVE SIDE
1 x 4mm stepped port
Mechanical front shifter only
S176500011
CBG MY18 DIVERGE RIGHT SIDE ICR PORT FOR FRONT DER
3
DRIVE SIDE
1 x 4mm stepped port, 1 x 4mm thru port
Dropper post only, or dropper post with mechanical front shifter
S176500010
CBG MY18 DIVERGE RIGHT SIDE ICR PORT FOR DROPPER POST
4
NON-DRIVE SIDE
1 x 4mm stepped port, 1 x 5mm thru port
Mechanical rear shifter or electronic shifting, with hydraulic rear brake
S176500009
CBG MY18 DIVERGE LEFT SIDE ICR PORT FOR SHIFT AND BRAKE
DISC BRAKE:
FOAM:
52cm
1
BRAKE HOUSING
2
HOOD SCOOP