5
INSTALLING THE COMMAND POST LEVER
The seatpost is supplied with a Specialized SRL lever (
fig.5
) to control the position of the saddle. This lever only works with 1x drivetrains (no front shifter), and uses the same mounting
interface design as SRAM shifters. It can be installed using one of the following mounting options:
5
MOUNTING OPTION
MOUNTING SOLUTION
SEPARATE MOUNT (supplied, fig.2, item 3)
MATCHMAKER CLAMP (SRAM # 11.7015.033.070)
SRAM MATCHMAKER-COMPATIBLE BRAKE LEVER
BOLT DIRECTLY TO THE BRAKE LEVER
OTHER BRAKE LEVER
AFTER-MARKET ADAPTERS IF AVAILABLE (E.G. PROBLEM SOLVERS)
Install the cockpit (fork, headset, stem, handlebar, Matchmaker clamp if necessary, brake levers, grips) onto the frame.
Install the SRL lever using the chosen mounting solution listed above.
Once the SRL lever is installed and oriented in the desired position, torque the bolt according to the brake lever or adapter
manufacturer’s torque specs.
WARNING! Ensure that the SRL lever does not interfere with brake lever operation. Failure to follow this instruction
can result in serious injury.
INSTALLING THE SADDLE
6
1
1
2
3
4
4
5
6
ITEM DESCRIPTION
1
BOLT
2
LOWER CRADLE
3
UPPER CRADLE
4
BARREL
5
SADDLE
6
SEATPOST ASSEMBLY
Fig.6:
Assemble the seatpost head parts ( 1, 2, 3, 4) on the seatpost assembly (6).
For easier installation of the saddle, only thread the barrels onto the bolts one turn.
Fig.6:
Grease the spherical bolt head surface.
Fig.6:
Insert the saddle rails between the upper and lower cradle.
Fig.6:
Adjust the saddle angle and fore-aft position as desired, then torque to 58 in-lbf / 6.5 Nm.