1
1. User Assembly
A.
Attach the Adjustment Stem to the Base Tube. Using the
8mm Allen Wrench provided, install the Stem Bolts & Stem
Washers as shown below. Ensure curved face of each Stem
Washer is installed against curved surface of Adjustment
Stem.
B.
To install Tray Top, pull and hold Main Stem Knob outward
while inserting Tray Top into Adjustment Stem (insert past
Safety Mark). Release Main Stem Knob to lock Tray Top in
place at desired height. Finally, tighten Main Stem Knob &
Side Stem Knob to secure Tray Top.
C.
Install Tray Angle Lock Knob & Washer.
Parts
Tray Top
Base Tube (with casters)
Adjustment Stem
Tray Angle Lock
Knob & Washer
Stem Bolts &
Stem Washers
Safety Mark
Main Stem Knob
Side Stem Knob
