6
Motor Vehicle Installation
1. Verify that your vehicle is equipped with LATCH anchors (Figure 7). Consult your vehicle’s
user manual to locate the exact position of the LATCH anchors.
2. Before installing the Booster Car Seat into a vehicle, verify the 5-Point Positioning
Harness is securely installed onto the Booster Car Seat.
3. Install the Booster Car Seat with the LATCH Strap by snapping both LATCH Strap
Buckles into vehicle LATCH anchors until you hear an audible “click” from each Buckle
(Figure 8).
4. Place weight on the Booster Car Sheet by positioning your knee on the seat surface,
then pull tightly on the LATCH adjustment strap until slack is removed.
WARNING:
Unsecured objects can become flying hazards and can cause serious injury
in an accident. Always ensure that the Booster Car Seat remains secured to the vehicle
with the LATCH anchor system even when the Booster Car Seat is not in use. LATCH is
ALWAYS required when Booster Car Seat is in use.
Vehicle LATCH Belt Installation
5-Point Positioning Harness Adjustment
Adjust the length of the Crotch Strap to allow the Pelvic Belt to lay across the pelvis.
This will prevent the Pelvic Belt from laying across the lower abdomen.
The Pelvic Harness Buckle has one quick-release button that unlocks both Waist
Straps from the Crotch Strap for quick and easy access to child. Both waist strap
male clips must be attached together BEFORE they can be inserted into the Pelvic
Harness Buckle (Figure 11).
The Pelvic Harness Waist Strap length can be easily adjusted by depressing the
gray adjustment tab and adjusting the strap length to fit snugly (Figure 10).
To ensure proper placement of the Chest Harness, make sure the Chest Strap
lays in the middle of the child’s chest.
Use the shoulder pads to prevent child’s neck and face from rubbing on the plastic
buckles.
WARNING:
The 5-point Positioning Harness is NOT a safety harness and is ONLY used to comfortably position the child in the
Booster Car Seat. When using the Booster Car Seat in a motor vehicle, the child MUST ALWAYS be properly restrained by the
vehicle’s 3-Point Lap and Shoulder Seatbelt as per this User Manual.
(Figure 7)
Latch Anchors
(Figure 8)
Latch Strap Buckles
(Figure 9)
5-point Harness Adjustments
(Figure 10)
Waist Strap Adjustment
(Figure 11)
Pelvic Harness Buckle
