Low Tonnage Gauge Kits for Atlas™ Manual Hydraulic Presses
9
When the gauge connector (
39
) has been fitted to the manifold tube
(
74
), fit the 15 or 25 ton load gauge (
31
) to the gauge connector by
tightening of the top nut (
N1
) connection. (See
Fig 4.
) Tighten together
by turning (
N1
) anticlockwise and holding the load gauge (
31
).
Fig 4. Both Gauges Fitted to the Manifold Block
Proceed to fit the complete manifold tube
assembly with the two gauges via the fixing
bolt (
77
) and Dowty seal (
78
) into position
on the pump block assembly of the press,
from where the original gauge (
31
) and
gauge connector (
39
) have been removed.
Tighten the fixing bolt (
77
) using the 19mm
A/F end of the spanner supplied. The
completed assembly of parts for a low
tonnage gauge kit as fitted to an Atlas™
manual hydraulic press is shown as
Fig 5.
Fig 5. Complete Kit Assembly Fitted
to a Manual Press
39
75
31
N1
Summary of Contents for GS15051
Page 1: ...Low Tonnage Gauge Kits for Atlas Manual Hydraulic Presses User Manual 2I 15051 8...
Page 2: ......
Page 3: ...Low Tonnage Gauge Kits for Atlas Manual Hydraulic Presses User Manual 2I 15051 8...
Page 17: ...Notes for Use of Low Tonnage Gauge Kit...
