Mini-Pellet Press
15
5. Legend for the Mini-Pellet Press
(
1
) 7mm Pellet die assembly.
(
2
) Pressing area of Mini-Pellet Press.
(
3
) Lead screw assembly.
(
4
) Pressure screw knob assembly.
(
5
) Pressure screw knob assembly.
(
6
) Pellet die ring holder (body).
(
7
) 3” x 2” slide mount.
(
8
) Top anvil (long plunger).
(
9
) Bottom anvil (short plunger).
(
10
) Perspex extractor cap.
(
11
) Lead screw pressing face.
(
12
) Piston.
(
13
) Pressure gauge.
(
14
) O-rings for ring holder fixing when fitted on 3” x 2” slide mount.
Specifications of the Mini-Pellet Press
Maximum load - 2 tons.
Pellet Die diameter 7mm.
Maximum space between pressing faces - 45mm.
Minimum space between pressing faces - 15mm.
Piston stroke - 0.5mm.
Upper pressing face area (lead screw diameter) - 17.0mm.
Lower pressing face area (piston diameter) - 21.6mm.
Dimensions (excluding leadscrew assemblies) - 110mm wide x 200mm
long x 155mm high.
Dimensions (including leadscrew assemblies) - 110mm wide x 265mm
long x 215mm high.
Weight - 4.2Kg.
