User Manual
10
4. Unpacking and Checklist
On receipt of your USB Temperature Controller please check that the
following have been supplied.
•
USB Temperature Controller (P/N - 261-058)
•
Desktop PSU (P/N - 267-045)
•
Mains power cable suitable for your country
•
USB cable
•
USB memory stick that has user instruction manuals & software
5. USB Temperature Controller Software
The controller is supplied with Window® software on the USB drive
supplied. The software provides two methods of controlling the USB
Temperature Controller and its associated hardware.
The default method is
Manual
where the user sets the Target
temperature (set point) and the Ramp rate and manually turns the
controller On and Off via the application interface.
The second method is to create a
Program sequence
for the
application to run automatically.
Installation
The software is provided on a USB drive and can be installed by
running the executable.
E.g. SpecacTemperatureController_1_0_17_0.exe