13
Chapter 5
Other
Troubleshooting
If you think this product may be broken, check the following troubleshooting items. Some minor operational errors can make
the product appear to be broken.
Potential causes other than this product should also be considered. Check the other devices being used as well as all simultaneously
operated electrical devices. If the following instructions do not help even on multiple inspections, contact us. (
page 15)
Issue
Cause/Treatment
Reference
The power does not turn on.
•
Is the power plug disconnected from the electrical outlet?
p
Correctly insert the power plug into the outlet.
p. 9
•
Is the power plug disconnected from the AC IN terminal?
p
Correctly insert the power plug.
p. 9
•
If the power will not turn on even with correctly connecting the power plug, the
fuse may be broken.
p
Contact us for consultation.
p. 15
There is no sound.
•
Is the connecting cord disconnected from the terminal, or connected incorrectly?
p
Correctly connect the cord.
p. 4 - p. 9
•
Is the speaker cord disconnected from the terminal, or connected incorrectly?
p
Correctly connect the speaker cord.
p. 4 - p. 8
•
Is the terminal or connecting cord pin plug dirty?
p
Wipe clean the terminal or plug.
–
•
Does the setting of the INPUT selector switch of this product match the terminals
with the device connected?
p
Correctly select the input.
p. 4 , p. 11
•
Is the GAIN selector switch of this product set to EX-VOL?
p
Set it to the MAX or -6dB position.
p. 11
There is no sound from one
speaker.
•
Is the connecting cord or speaker cord for one side disconnected?
p
Correctly connect the cord.
p. 4 - p. 9
Sound comes out of the speakers
even after turning off this
product.
•
Immediately after turning off the power, sound may come out of the speakers while
the OFF (WAITING) indicator is lit, but this is not a sign of breakage.
p
When playback is finished, first turn the volume of this product all the way down
and then shut off the power of this product.
p. 9
The volume is low.
•
Is the GAIN selector switch set to -6 dB?
p
Set it to MAX.
p. 11
The sound is unnatural.
•
Is the SPEAKERS selector switch set to MONO x 2 or MONO BTL?
p
Correctly select the input.
p. 11
Care and maintenance
For daily maintenance, use a polishing cloth to lightly wipe the front panel of this product. If it is very dirty, use a soft cloth
moistened with neutral detergent watered down to 1/5-1/6 concentration and wipe off the dirt, then wipe dry with a dry cloth.
If alcohol, thinner, petroleum ether or insecticide adhere to the front panel it may be damaged, so use caution. Whenever using
pre-moistened wipe, be sure to completely read the warning instructions that come with the wipe.
This product uses natural wood for its side panel and insulator. Do not place it in direct sunlight or near a heater. The front panel
may become discolored, and the product may be warped due to the natural wood contracting.
