11
Chapter 4
How to Operate
Playback steps
When using this product as a pre-main amplifier
4
6
3,7
1
Check that the VOL. LED/MODE switch on the rear
panel of this product is set to NORMAL AMP.
2
Turn on the power of the playback device.
3
Check that the volume level of this product is turned
down, and lift up the front panel POWER switch while
pulling out on it to turn on the power.
Check that the ON indicator on the body front panel is lit.
4
Select the input to this product.
Rotate the LINE SELECTOR to select
the terminal (LINE 1 - LINE 5) to which
the playback device is connected.
5
Operate the playback device and begin playback.
6
Rotate the VOLUME (level adjustment knob) left and right
to set the audio level.
7
When playback is finished, lower the audio volume level
and push down the front panel POWER switch while
pulling out on it to turn off the power.
Be sure to lower the audio volume level.
Caution
•
When turning the product on immediately after turning it off,
check to make sure the OFF (WAITING) indicator has gone off
completely. (
page 9)
Summary of Contents for Designer Audio RSA-F33EX
Page 1: ...RSA M99...
