
14
Chapter 3
Part Names
Front panel
1
4
3
5
6
2
1
POWER switch
Turns power ON and OFF.
Pulling the power switch releases the lock. To turn on the
power, raise up the power switch while pulling out on it.
To turn off the power, lower the power switch while pulling
out on it.
2
ON indicator
Shines green when this product is on.
3
VOLUME (level adjustment knob)
Adjusts the volume level.
Note
• This product contains a high quality electrical volume IC
that is high precision and ultra low noise, with the result that
audio quality is not affected depending on the VOLUME (level
adjustment knob) position.
4
LINE SELECTOR (input switching knob)
Selects the playback device (LINE 1-LINE 5).
5
Remote control receiver
6
VOLUME CONTROL
Indicates the volume position and state during remote
control operation.
N : Lit green constantly after power-on.
+ (-) : Flashes blue when the + (-) button on the remote
control is pressed, and lights when the position is
further toward the + (-) side than the position of
the volume control of the unit.
ATT : Lights red when the ATT button on the remote
control is pressed.
When the volume matches the position of the volume
control of the unit, only N is lit.