8999118EN: v1.1 21/12/2020
20
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3
Safety Decals
Safety decals are located on various points of the machine see
Figure 3.1. They can be identified by the yellow upper panel depicting the hazard, and the lower white panel
indicating means of avoidance or precautions to be taken. These decals have no text. It is essential that all
operators and personnel associated with the machine fully understand their meanings, which are shown in
Figure 3.1.
Safety decals should be kept clean and legible at all times. Any safety decals which are found to be missing or
illegible should be replaced.
Item
No.
Decal Description
Quantity
1
Instruction: - PTO input speed requirement
1
2
Instruction: - Grease every 8 hours
5
3
Instruction: - Correct belt tensioning
1
4
Instruction: - Check chains
1
5
Warning: - Remove key and read handbook
1
5
Warning: - Keep nuts tight. Check every 8 hours
1
5
Danger: - Do not stand on machine
1
5
Danger: - Cutting hazard from rotating blades
1
5
Danger: - Thrown object hazards
1
5
Danger: - Falling wing hazard
1
5
Danger: - Pinch points
1
5
Danger: - Hearing protection required
1
Figure 3.1
