8999127: v1 14/08/2018
Page 2.5 of 2.5 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
-
It is mandatory
for maintenance on the Quadsaw to only be performed by skilled and specialized personnel, in strict
compliance with the instructions in this manual, and any worn or damaged parts should be replaced.
-
It is mandatory
to always use original spare parts when carrying out repairs and maintenance.
-
It is mandatory
to store the Quadsaw in a safe place which is protected from the elements, when the work is
completed.
The Quadsaw has been designed and built in accordance with current safety regulations. Special maintenance
(repairs) must only be performed by qualified personnel and original spare parts must be used.
2.7
Safe maintenance
In order to guarantee safe maintenance of the Quadsaw it is necessary to respect the following provisions:
-
It is prohibited
to remove or tamper with the safety devices.
- Periodically check safety device integrity and operation.
- Periodically check screws and bolts tightness.
-
It is mandatory
to periodically verify the condition of the hoses. They must not be cut or have abrasions, otherwise
immediately replace them with other hoses having the same characteristics.
-
It is mandatory
to comply with the recommended oils.
-
It is mandatory
to switch the tractor engine off and always disconnect the PTO shaft before cleaning or performing
maintenance on the Quadsaw.
-
It is mandatory
to strictly perform maintenance on the Quadsaw according to the instructions in this manual and
replace the damaged or worn parts with original spare parts only.
-
It is mandatory
for maintenance on the Quadsaw to only be performed by skilled and specialized personnel, in strict
compliance with the instructions in this manual.
-
It is mandatory
to always use original spare parts when performing repairs and maintenance on the Quadsaw. Using
non-original parts immediately renders the warranty null and void and can compromise the durability and reliability of
the machine.
-
It is mandatory
for parts or components of the Quadsaw to be lifted adequately and with suitable lifting accessories
and harness and according to the regulations in force in the country where these operations take place.
-
It is forbidden
to perform welding, flame-cutting or modify the structure of the Quadsaw.
- The dangers signalled on the machine by way of decals of suitable dimensions, applied on the Quadsaw in easy to
see places.
- These decals give the proper indications in an essential manner in order to avoid danger and prevent the risk of
damage or injury. These decals must always be kept clean and immediately replaced when removed, even partially, or
damaged:
it is prohibited
to operate the Quadsaw when even one of these signs is missing from the spot where it was
installed by the Manufacturer.
-
It is mandatory
to save and keep this manual for the entire life of the Quadsaw.
