8999071EN: v1.410/10/2019
13
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3
Machine Operation
The machine is equipped with hammers (Figure 7) on the rotor shaft or with y-blades (Figure 8) as an option.
Hammers are appropriate for more hard work, for material with diameter till 5 cm. Y-blades are used for material
with diameter max. 3 cm. While rotating working tools cut the material and lift it under the top of the frame.
Falling material is again cut several times by rotating hammers (or Y-blades).
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
