manualshive.com logo in svg

Spear & Jackson SPM41, Original Instruction Manual

Share
Download
Spear & Jackson SPM41 Original Instruction Manual Download Page 8

14

15

AFTER sAlEs suppoRT 

01904 727505   www.spearandjackson-power.com

www.spearandjackson-power.com   

AFTER sAlEs suppoRT 

01904 727505

OPERaTION

■

 

Never mix oil with petrol.

■

 

Refuel carefully to avoid overfilling or spilling fuel to allow for 
expansion. There should be no fuel in the filler neck.

■

 

Clean up any overflow or splashes of petrol before starting 
the engine.

Tighten the filler cap after filling, finger tight only.

NOTE! The Spear & Jackson 41cm hand Push Lawnmower has a maximum 
fuel capacity of 800ml.

PREPaRING TO OPERaTE ThE LaWNMOWER

Setting the cutting height

WaRNING!

-The blade can cause serious injury. Before adjusting 
the mower height, stop the engine and wait for the 
mower blade to come to a complete stop.

i.  Pull the lever towards the wheel, then move it forward or 

backward to adjust the cutting height.

ii. Move it to any one of the 5 positions for the desired 

cutting height.

iii. Return lever into securing plate.

NOTE! Never use the lowest cutting height for the first cut of the season 
or in drought conditions. Only about one thirds of the grass height should 
be cut.

Starting the engine

WaRNING!

Do not operate the machine in enclosed or poorly 
ventilated areas as the exhaust gas contains toxic 
substances. Keep hands, feet, hair and clothing away 
from all the moving parts of the machine. The exhaust 
and other parts of the machine will become hot during 
use. Make sure that the blade is securely fastened 
before starting the engine.

1

2

1

2

Summary of Contents for SPM41

















Reviews:

No comments

Brands by name

Popular brands

Load more brands