12
AFTER SALES SUPPORT 0345 605 2069
ASSEMBLE
ASSEMBLING THE BLOWER TUBE (See Fig. A1-A3)
1) Before assembling the Blower Tube (4), be sure the On/Off
Switch (2) is in ‘’O’’ position.
2) Fit the Blower Tube to the motor housing as shown in Fig. A1.
3) Fix the blower tube to the blower port with the screw
provided(See A2).
4) Check the Blower Tube is firmly secured(See A3).
WARNING!
Do not attempt to operate the On/Off Switch by any means
other than the normal assembly or removal of the tube.
Fig.A1
Fig.A2
Fig.A3
1