22
AFTER SALES SUPPORT
0345 605 2067
TROUBLESHOOTING
Problem
Possible cause
Solution
1. No Power
•
Check if the plug socket,
cable, line and plug are in
good condition.
•
If any of the parts are defec-
tive, such as On/Off switch /
motor etc.
•
Have it repaired via a certified
electrician.
•
Please contact after sales sup-
port at 0345 605 2067.
2.The high pressure
washer operates
intermittently
•
Internal loose electrical con-
nection.
•
On/Off switch defective.
•
Contact the after sales support
at 0345 605 2067.
•
Contact the after sales support
at 0345 605 2067.
3. No or only little
pressure is built up
•
There is air in hose.
•
Check if all inlet pipes lead-
ing to the pump for leaks or
clogs.
•
Turn off the machine. Run the
machine without the high pres-
sure hose connected until water
starts flow without bubbles.
Reattach the high pressure hose.
•
Contact the after sales support
at 0345 605 2067.
4. Great pressure
varieties
•
Check if the nozzle is
blocked.
•
Inlet water is blocked.
•
Clean the high pressure jet noz-
zle with the nozzle pin provided.
•
Make sure the inlet hose is not
twisted.
5. Machine is leaking
•
Sealing parts are broken.
•
Please contact the after sales
support at 0345 605 2067.
WARNING
-
Only perform the steps described within these instructions! All further
inspection, maintenance and repair work must be performed by an authorised
service centre or a similarly qualified specialist if you cannot solve the problem
yourself!
Gloves and appropriate protective clothing must be worn when performing these
instructions.
Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore, check the product using this section. In most cases the problem can be solved
quickly.
