24
ACQUIRE DATA:
BOX 3, 4, 5
Power Amplifier Gain Analysis
Wait until the sequence complete all
settings and measurements.
The waiting time is about 15 s.
NOTE
1
: Crest Factor analysis regard line signal. Be sure your power amplifier is able to supply selected CF.
NOTE
2
: To save time we suggest recording a custom pattern, selecting
Save this configuration…
in the BOX 1.
With this method, for the same test type (utilizing identical set up parameters as power amplifier, signal input, etc.) you need to launch Crest Factor Analysis and Amplifier
Gain Analysis only when save the configuration, because in the other sessions you can recall all saved setup parameters in one shot.
Noise Generator Bit
Select the preferred bit number to modify
internal generator dynamic.
Signal Analysis
Wait until the sequence complete all
settings and measurements.
The waiting time is about 10 s.
Limiter
Adjust limiter to fine-tune crest factor.
Crest factor
Crest factor time chart.
Selected values of CF ratio and CF dB.
Voltage
Vpeak, Vrms time chart and display.