SPEAKER ADJUSTMENTS
Grille Removal
T
he Tantra grille is pre-installed at the factory. To
remove it, start on one corner and simply pull the grille
out with your fingers
(Diagram 11)
Then
do the same
on the opposite side
(Diagram 12)
and continue to
gently work your way down.
Pivoting Tweeter Adjustment
T
antra Series speakers come from the factory with
the tweeter in the neutral position. This will result in
the overall smoothest response. However, depending
on your particular primary area, room acoustics, ceil-
ing height, or personal preference, you may find the
sound more pleasing by pointing the tweeters in a
particular direction.
If additional treble is desired in the primary listening
area, point the tweeter towards that area; and if less
treble is required, point the tweeter away.
When used in a home theater surround sound envi-
ronment as side or rear channel speakers, the best
result may be obtained by pointing the tweeters
toward an adjacent wall to diffuse high frequencies.
To adjust the tweeter and midrange, push gently
at the edges to point them in the desired direction.
(Diagram 13 & 14)
CAUTION: Avoid touching the tweeter and midrange
dome as damage WILL occur.
Grille Installation
To reinstall the grille, simply align the holes on the side
of the grille with the pins located on the front of the
speaker. Once aligned push the grille in gently until it
snaps into place.
Adusting the Grille Badge
The Tantra Grille badge is factory installed in the hori-
zontal position. If you desire to maintain the badge
in that particular orientation when using your Tantra
Series Speakers as a center channel, simply rotate
the grille badge with your fingers. The spring loaded
mechanism will allow the grille badge to be rotated a
full 360°.
DIAGRAM 13:
Pivoting Tweeter and Midrange (Tantra Three only)
DIAGRAM 11:
Remove Grille from corner
DIAGRAM 12:
Pull out opposite side
DIAGRAM
14:
Pivoting Tweeter
4
Summary of Contents for Tantra Triple LCR
Page 1: ......