background image

30

www.SpeakerCraft.com

LImITEd wARRANTy

Core Brands, LLC (“Core Brands”) warrants to the original retail purchaser only that this product will be free of manufacturing 
defects in material and workmanship for the following periods and subject to the limitations and exclusions set forth below:

 

Two years from the date of purchase

 
This warranty is not transferable to subsequent purchasers of the product.  To obtain warranty service, contact the authorized dealer 
where you purchased your product or take the unit to the nearest authorized SpeakerCraft dealer (with proof of purchase – claims 
made without proof of purchase will be denied) who will test the product and if necessary, forward it to Core Brands for service. If 
there are no authorized SpeakerCraft dealers in your area, you must contact Core Brands to receive a factory Return Authorization 
Number. DO NOT RETURN ANY UNIT WITHOUT FIRST RECEIVING WRITTEN AUTHORIZATION AND SHIPPING INSTRUCTIONS 
FROM CORE BRANDS.  

Upon examination, Core Brands will, at its sole option and expense, repair or replace any product found to be defective. Core 
Brands will return the repaired or replaced unit to you via its usual shipping method from the factory to your address in the 
United States of America or Canada only.  Any shipping costs for addresses outside of the United States or Canada shall be the 
responsibility of the purchaser.  In the event that this model is no longer available and cannot be repaired effectively, Core Brands, at 
its sole option, may replace it with a different model of equal or greater value, or refund the original purchase price paid.

THE FOREGOING ARE YOuR EXCLuSIVE REMEDIES FOR BREACH OF WARRANTY.

This Warranty does not include service or parts to repair damage caused by improper use or handling, including but not limited to 
damage caused by accident, mishandling, improper installation, commercial use, abuse, negligence, or any defect caused by repair 
to the product by anyone other than Core Brands. 

This warranty does not cover reimbursement for your costs of removing and transporting the product for warranty service 
evaluation, or installation of any replacement product provided under this warranty.

This Warranty will be void if:

 

 

the Serial Number on the product has been removed, tampered with or defaced.

 

• the product was not purchased from an authorized dealer or reseller.

THE FOREGOING WARRANTIES ARE EXCLuSIVE AND IN LIEu OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES.  

CORE BRANDS EXPRESSLY DISCLAIMS ALL SuCH OTHER WARRANTIES, INCLuDING BuT NOT LIMITED TO IMPLIED 

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICuLAR PuRPOSE AND NON-INFRINGEMENT, WITH RESPECT 

TO THE PRODuCT.  TO THE MAXIMuM EXTENT PERMITTED BY LAW, SPEAkERCRAFT SHALL NOT BE RESPONSIBLE 

FOR ANY INCIDENTAL OR CONSEQuENTIAL DAMAGES EXCEPT TO THE EXTENT PROVIDED (OR PROHIBITED) BY 

APPLICABLE LAW, EVEN IF CORE BRANDS HAS BEEN ADVISED OF THE POSSIBILITY OF SuCH DAMAGES.

  

Notwithstanding the above, if you qualify as a “consumer” under the Magnuson-Moss Warranty Act, or applicable state laws, then 
you may be entitled to any implied warranties allowed by law for the Warranty Period.  Further, some states do not allow limitations 
on how long an implied warranty lasts or allow the exclusion or limitation of consequential damages, so such limitations may not 
apply to you.  This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the name of your nearest authorized SpeakerCraft dealer, contact:  CORE Brands LLC, 1800 South McDowell Blvd, Petaluma, 
California 94954, or call (800) 472-5555 or (707) 778-5733.  Please be advised that Core Brands only sells its products via the 
Internet through a select group of authorized Internet dealers.  These are listed on our website at www.SpeakerCraft.com.  Products 
offered on the Internet through unauthorized Internet dealers are not covered by the Core Brands warranty and may be either:

 

1) goods acquired on a secondary or grey market

 

2) counterfeit or stolen goods

 

3) damaged, or defective goods

Please fill in your product information and retain for your records.

   Model ______________________    Serial No. _____________________________________________  Purchase Date ______________

ATTENTION: TO OuR VALuED CONSuMERS:

 

To insure that consumers obtain quality pre-sale and after-sale support and service, SpeakerCraft products are sold exclusively 
through authorized dealers.  This warranty is VOID if the products have been purchased from an unauthorized dealer.

Summary of Contents for SC12-30




































Reviews: