10
www.SpeakerCraft.com
5. CONNECT ANd mOUNT IR EmITTERS
Connect the 3.5mm plug of each IR emitter into the designated port on the
MRA-664. The IR ports, labeled 1-6, are independently routed and may be
used for any system device. Make sure to use the included System Worksheet
to note which IR port is being used for each device. When using an additional
MRA-664 chassis to add zones 7 thru 12, the six IR outputs on the 2nd chassis
are available as additional unique IR outputs.
When controlling media room system additional IR outputs may be necessary.
IR outputs may be connected to a SpeakerCraft Amplified Terminator Unit AT-1.0.
DVD
Unit
SATT
AVR
TV
IR IN